Oil-Rite Corporation > Liquid Level Gages > Steel Gages with Viton Seals > Standard Steel Gage with Straight Threads > View Items  

Standard Steel Gage with Straight Threads

 
Check up to five results to perform an action.

Standard Steel Liquid Level Gages can be used on hydraulic reservoirs, gearboxes, bearing housings, crankcases, transformers and machinery oil reservoirs.  Their use can be extended to any industrial liquid level viewing application.  Fluid enters through the cross hole in the hollow lower bolt and the gage is vented into the tank through the cross hole in the top bolt.   The length between the center of the two bolts is referred to as the centerline.  Centerlines are available from 3" to 60". 




    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 226 - 232 of 232 « 6 7 8 9 10 

Item #

Centerline

Mounting

Feature

Max Pressure

Max Temperature

Seals

Body Material
B1559-15900VB1W 59" 1/2"-20 with Nuts Standard 125 PSI 300° F Viton Plated Steel
B1559-15900VA2W 59" 1/2"-13 Standard 125 PSI 300° F Viton Plated Steel
B1559-15900VM1W 59" M12 X 1.75 Standard 125 PSI 300° F Viton Plated Steel
B1559-16000VA1W 60" 1/2"-20 Standard 125 PSI 300° F Viton Plated Steel
B1559-16000VB1W 60" 1/2"-20 with Nuts Standard 125 PSI 300° F Viton Plated Steel
B1559-16000VA2W 60" 1/2"-13 Standard 125 PSI 300° F Viton Plated Steel
B1559-16000VM1W 60" M12 X 1.75 Standard 125 PSI 300° F Viton Plated Steel
  Results 226 - 232 of 232 « 6 7 8 9 10 
Site Created by ThomasNet Web Solutions and Powered by Navigator Platform 
Oil-Rite Corporation