• Levelux Category Standard

    Levelux Liquid Level Gages provide illumination of the liquid level.  A motion activated LED light not only enhances visibility of the fluid level, but also draws attention to the gage.  It helps operators or maintenance individuals monitor the contents and avoid depleting the oil.  Levelux is particularly useful in dimly lit areas or where the line of sight is partially obstructed.


  • B1357 Category

    Vented Brass Gages are available in short elbow, long elbow, union coupling, female inlet, and straight configurations, as well as with thermometer.  The leak proof construction, large vent hole and unrestricted passages permit fast and accurate liquid level response.  These accurate and economical Liquid Level Gages can be used on oil bearings, gear boxes, crank cases, transformers, switches or any application requiring visual indication of liquid level. 

  • B1603 Category

    Vented Steel Gages are available in short elbow, long elbow, union coupling, and straight configurations.  The glass sights feature a red line on a white background to enhance liquid level visibility.  The leak proof construction, large vent hole and unrestricted passages permit fast and accurate liquid level response.  These Liquid Level Gages can be used on oil bearings, gear boxes, crank cases, transformers, switches or any application requiring visual indication of liquid level.

  • B3641 Compilation Vented Nylon Gages

    Nylon Gages feature a durable Trogamid nylon sight and aluminum alloy base and cap.  They are available in short elbow, long elbow, union coupling, and straight configurations.  The leak proof construction, large vent hole and unrestricted passages permit fast and accurate liquid level response.  These Liquid Level Gages can be used on oil bearings, gear boxes, crank cases, transformers, switches, or any application requiring visual indication of liquid flow.

  • B3540 All Category Image

    Aluminum Liquid Level Gages are made of corrosion and rust resistant milled aluminum.  The end pieces are permanently secured through a staking process.  Fluid enters through a cross hole in the hollow lower bolt. The gage is vented into the tank through the top bolt.  The length between the center of the two bolts is referred to as the center line.  Centerline measurements range from 3” to 36”.  These gages are available in a standard model, with dial thermometer, with card thermometer and with shutoffs.  Liquid Level Gages can be used on hydraulic reservoirs, gearboxes, bearing housings, crankcases, transformers and machinery oil reservoirs.  Their use can be extended to any industrial liquid level viewing application.  

  • Steel Gage Category

    Steel Liquid Level Gages feature a red line on a white background to enhance liquid level visibility.  These gages are available in a standard configuration, with an easy-to-read dial thermometer, or shut-off stems.  Fluid enters through the cross hole in the hollow lower bolt.  The gage is vented into the tank through the top bolt.  The length between the center of the two bolts is referred to as the center line.  Centerlines are available from 3" to 60".  These gages can be used on hydraulic reservoirs, gearboxes, bearing housings, crankcases, transformers and machinery oil reservoirs.  Their use can be extended to many industrial liquid level viewing applications.

  • Steel Gage Category

    Steel Liquid Level Gages feature a red line on a white background to enhance liquid level visibility.  These gages are available in a standard configuration, with an easy-to-read dial thermometer, or shut-off stems.  Fluid enters through the cross hole in the hollow lower bolt.  The gage is vented into the tank through the top bolt.  The length between the center of the two bolts is referred to as the center line.  Centerlines are available from 3" to 60".  These gages can be used on hydraulic reservoirs, gearboxes, bearing housings, crankcases, transformers and machinery oil reservoirs.  Their use can be extended to many industrial liquid level viewing applications.

  • 304 Stainless Steel Category Photo

    304 Stainless Steel Liquid Level Gages feature a red line on a white background to enhance liquid level visibility.  They are available with or without an easy-to-read dial thermometer. Fluid enters through the cross hole in the hollow lower bolt.  The gage is vented into the tank through the top bolt.  The length between the center of the two bolts is referred to as the center line.  Centerlines are available from 3" to 60".  These gages can be used on hydraulic reservoirs, gearboxes, bearing housings, crankcases, transformers and machinery oil reservoirs.  Their use can be extended to many industrial liquid level viewing applications.

  • 316 Stainless Steel Category Photo

    316 Stainless Steel Liquid Level Gages feature a red line on a white background to enhance liquid level visibility.  They are available with or without an easy-to-read dial thermometer. Fluid enters through the cross hole in the hollow lower bolt.  The gage is vented into the tank through the top bolt.  The length between the center of the two bolts is referred to as the center line.  Centerlines are available from 3" to 60".  These gages can be used on hydraulic reservoirs, gearboxes, bearing housings, crankcases, transformers and machinery oil reservoirs.  Their use can be extended to many industrial liquid level viewing applications.

  • Flexible Vinyl Category

    Flexible Liquid Level Gages feature a vinyl sight made of clear, heavy-walled plastic that is flexible and shatterproof.  The vinyl tubing will follow the contour of curved surfaces.  Liquid level and clarity can be viewed from all angles.  These gages are available with or without an easy-to-read dial thermometer, in centerlines ranging from 3" to 60".  Fluid enters through the cross hole in the hollow lower bolt.  The gage is vented into the tank through the top bolt.  Liquid Level gages can be used to view liquid levels in hydraulic reservoirs, tanks, large steel mill pumps, gearboxes, bearing housings, hydraulic equipment, crankcases, transformers and machinery oil reservoirs.  Their use can be extended to many industrial liquid level viewing applications.  

  • B3642 Compilation

    Nylon Liquid Level Gages are constructed with aluminum alloy end blocks and feature a clear and durable Trogamid nylon sight.  A red line on the back of the sight enhances liquid level visibility.  These gages are available in a standard configuration, with dial thermometer, or with shut-off stems.  The length between the center of the two bolts is referred to as the centerline.  Centerlines are available from 3" to 36". Nylon Liquid Level Gages can be used to view liquid levels in hydraulic reservoirs, tanks, large steel mill pumps, gearboxes, bearing housings, hydraulic equipment, crankcases, transformers and machinery oil reservoirs.  Their use can be extended to many industrial liquid level viewing applications.

  • Adjustable Liquid Level Gage

    Nylon Liquid Level Gages with Adjustable Centerlines can accommodate centerline distances up to 1/4" longer or shorter than the specified measurement, for total adjustability of 1/2". This range of adjustability compensates for variances that can occur during the production of plastic tanks.  It is also suited to field installations where the distance between mounting holes may be less precise than in a controlled setting.

    Liquid level gages are used to view liquid levels in hydraulic reservoirs, tanks, large steel mill pumps, gearboxes, bearing housings, hydraulic equipment, crankcases, transformers and machinery oil reservoirs. Their use can be extended to many industrial liquid level viewing applications.

    The length between the center of the two bolts is referred to as the centerline.  Gages are available with centerline measurements ranging from 3” to 36”.  The centerline distance can be lengthened by 1/4" or shortened by 1/4", for a total adjustable range of 1/2".  For example, a gage with a 6” centerline can accommodate a centerline length from 5 3/4" to 6 1/4".  This adjustment is made by hand without the use of tools.  No disassembly is required. 

     

    Fluid enters through the cross hole in the hollow lower bolt. The gage is vented into the tank through the top bolt. These gages feature aluminum alloy end blocks.  An o-ring secures each end block in position.  When moderate pressure is applied, the top end block will slide within a 1/2” long groove in the sight to adjust the centerline length. 

    The Trogamid nylon sight is clear and durable.  Liquid level and clarity can be viewed from all angles. A 1/8” wide red line on the back of the sight enhances liquid level visibility. Leak-proof construction is achieved with Buna-N seals. The units tolerate up to 125 PSI and 205° F.

    The gage can be mounted from the front of the tank with (2) 1/2”-20 aluminum bolts, 1/2”-13 bolts, or M12 X 1.75 bolts. It can also be secured from the back of the tank using (2) hex nuts.  1/4", 3/8”, 1/2" or 3/4” male NPT adapters are available.

    The adjustable gage design is patent pending.

    For more information on Nylon Liquid Level Gages with Adjustable Centerlines, contact Technical Sales:

    Email: sales@oilrite.com

    Phone: (920) 682-6173

  • B3950-1 Image Standard

    Broad Face Nylon Liquid Level Gages feature a large rectangular sight, allowing liquid level and clarity to be easily viewed from a distance.  Easy-to-read “High” and “Low” level markings provide additional visual cues.  Broadface gages are also available with an easy-to-read dial thermometer or shut-off stems.  Fluid enters through the cross hole in the hollow lower bolt.  The gage is vented into the tank through the the top bolt.  The length between the center of the two bolts is referred to as the center line.  This gage is available with centerlines from 3" to 36".  Liquid Level Gages can be used on hydraulic reservoirs, gearboxes, bearing housings, crankcases, transformers and machinery oil reservoirs.  Their use can be extended to many industrial liquid level viewing applications.

  • B2144-7

    Vented Filler Gages feature a large diameter and swivel cap, making them ideal for filling.  These durable units have an acrylic sight with aluminum and plated steel components.  The gages can be used to view liquid levels on oil bearings, gear boxes, crank cases, transformers, switches and various other applications. 

  • B2550 Detail

    Drum Gages with Faucets can be used to determine the level and condition of liquids stored in steel drums. Oils, solvents, chemicals, water, and many other fluids may be used with the Drum Gage.  Drum Gages are suitable for indoor or outdoor use and provide instant visual checks with extreme accuracy. The normally closed (off)brass faucet allows fluids to be released at will.  It can be locked as an additional safety feature.

  • 4894

    Gage Accessories and Spare Parts include mounting brackets, replacement seal kits, various adapters, and more.