PurgeX Accessories

This adjustable, Programmable Cycle Timer regulates lubrication intervals from .6 seconds to 24 hours.  It is compatible with PurgeX systems.  A switch positioning chart is printed on the timer for ease in selecting time ranges.

3-Way Air Solenoid Valves are used with Air-Operated PurgeX systems.  They are powered by wiring to a Programmable Cycle Timer or other electrical signal.  The valve is equipped with an air inlet, air outlet, and exhaust outlet.

This Sight-Right is designed to connect with the liquid outlet of a PurgeX pump.  A green LED light blinks when liquid cycles out of the pump.  The purpose of the Sight-Right is to serve as visual confirmation that liquid is dispensing at the programmed intervals.

A simple-to-use PurgeX Threadapter Kit is required to attach an additional PurgeX pump to a PurgeX manifold.  It includes a patented brass Threadapter and 2 seals.

Seals in PurgeX pumps normally operate over millions of cycles without significant wear.  The majority of applications do not require seal replacement.  Complete Replacement Seal Kits are available for each PurgeX model.

These replacement spray nozzles are specifically for use with Spray Dispensing PurgeX, part number B3559. Lubricant and air mix at the nozzle tip to atomize fluid. 

PurgeX Spray Nozzles create a round spray pattern that can be used with PurgeX pumps for liquid.  The spray can reach from 4 to 6 inches in distance, depending upon liquid viscosity, air pressure and air cycle.

Wall Mounting Acrylic Reservoirs dispense liquid by gravity.  They are designed to serve as central reservoirs of oiling systems.  These reservoirs are available with or without filters.

Easy-Fill Polycarbonate Reservoirs use gravity to dispense liquid.  The units can be directly mounted to bearing housings, gear boxes, or transmissions.  The shatterproof construction of the reservoir makes it suitable for rugged industrial applications and safe to use in areas where glass is restricted.

Polycarbonate Reservoirs, or Oil Cups, use gravity to dispense liquid.  They are designed to serve as a central reservoir of an oiling system.  Durable, shatterproof polycarbonate reservoirs have polypropylene bases and withstand temperatures up to 225° F. They feature a cap that swivels out of the way for easier filling, while remaining attached to the reservoir. 

Square Polycarbonate Reservoirs use gravity to dispense liquid.  They are designed to serve as a central reservoir of an oiling system. 

Steel Reservoirs dispense liquid by gravity.  They are designed to serve as a central reservoir in an oiling system. Drains are extended with pipes at a 90° angle to allow easy access.  ...

Pressurized Grease Reservoirs use compressed air to maintain a pressure of 100 PSI or less on the grease supply.  These units feature a built in air regulator and pressure gauge for easy adjustment.  The fiberglass and aluminum reservoir has a safety relief valve set at 120 PSI to prevent over-pressurization.  A zerk grease fitting allows the reservoir to be filled quickly and easily.  ...