• B1559 Category

    Standard Steel Liquid Level Gages can be used on hydraulic reservoirs, gearboxes, bearing housings, crankcases, transformers and machinery oil reservoirs.  Their use can be extended to any industrial liquid level viewing application.  Fluid enters through the cross hole in the hollow lower bolt and the gage is vented into the tank through the cross hole in the top bolt.   The length between the center of the two bolts is referred to as the centerline.  Centerlines are available from 3" to 60". 

  • Category Standard Steel Gage with Adapter

    Standard Steel Liquid Level Gages can be used on hydraulic reservoirs, gearboxes, bearing housings, crankcases, transformers and machinery oil reservoirs.  Their use can be extended to any industrial liquid level viewing application.  Fluid enters through the cross hole in the hollow lower bolt and the gage is vented into the tank through the cross hole in the top bolt.   The length between the center of the two bolts is referred to as the centerline.  Centerlines are available from 3" to 60". 

  • B1560 & B1557 Category

    Steel Liquid Level Gages with Dial Thermometers are for any application requiring visual indication of both liquid level and liquid temperature.  Temperature is indicated in both degrees Fahrenheit and Celsius on the large stainless steel thermometer.  It displays 0 ° F (-20° C) to 250° F (120° C). The length between the center of the two bolts is referred to as the centerline.  Centerlines are available from 3" to 60".  

  • Category Dial Thermometer Steel Gage w Adapter

    Steel Liquid Level Gages with Dial Thermometers are for any application requiring visual indication of both liquid level and liquid temperature.  Temperature is indicated in both degrees Fahrenheit and Celsius on the large stainless steel thermometer.  It displays 0 ° F (-20° C) to 250° F (120° C). The length between the center of the two bolts is referred to as the centerline.  Centerlines are available from 3" to 60".  

  • B1579 Category

    Steel Liquid Level Gages with Shut-Offs can be used to view liquid levels in hydraulic reservoirs, gearboxes, bearing housings, crankcases, transformers and machinery oil reservoirs. These Steel Liquid Level Gages feature shutoff stems that can be adjusted to stop fluid flow into the gage.  This can be used as a precautionary measure if breakage is a concern.  Should the gage need to be replaced, the plated steel hex nuts unscrew from the front and the gage can be removed without draining the tank.  Once a gage has been placed back onto the bolts and secured with hex nuts, the shut off valves can be opened and the gage will resume normal function.  Centerlines are available from 3" to 60". 

     

  • Category Shutoff Steel Gage w Adapter

    Steel Liquid Level Gages with Shut-Offs can be used to view liquid levels in hydraulic reservoirs, gearboxes, bearing housings, crankcases, transformers and machinery oil reservoirs. These Steel Liquid Level Gages feature shutoff stems that can be adjusted to stop fluid flow into the gage.  This can be used as a precautionary measure if breakage is a concern.  Should the gage need to be replaced, the plated steel hex nuts unscrew from the front and the gage can be removed without draining the tank.  Once a gage has been placed back onto the bolts and secured with hex nuts, the shut off valves can be opened and the gage will resume normal function.  Centerlines are available from 3" to 60". 

  • 1656

    This category contains NPT adapters for use with 1/2"-20 mounting steel liquid level gages.