Oil-Rite manufactures Lubrication Systems specifically to customer requirements. All systems are engineered, designed, manufactured and fully tested at Oil-Rite. This is an example of a custom built Circulating Oil System.

This Circulating Oil System is equipped with a cast iron pump providing 1.5 GPM at 1070 PSI. The 2 HP, 1175 RPM, TEFC motor is operated by 3 phase power at 230/460V 60Hz.

The 15 gallon capacity reservoir is constructed of welded steel. A top filler cap makes filling the reservoir quick and simple. The filler cap is equipped with an air filter and liquid strainer to help maintain liquid quality. There are (2) 1” female NPT returns and (2) 1/2” female NPT drains. A baffle in the tank separates sediment and reduces turbulence. A 100 mesh stainless steel suction filter within the reservoir filters larger debris.

An 8” centerline nylon liquid level gage on the outside of the reservoir has a dial thermometer displaying temperatures from 0° to 250° F, allowing visual check of liquid level, condition, and temperature at a glance.  A low level sensor is mounted to the gage and can be wired to shut down machinery or turn on warning devices when the liquid supply fails or recedes to a predetermined level.

Additional controls include:

·          A 10 micron, 1,000 beta filter located near the outlet to help maintain liquid quality.

·          A bronze check valve located at the system outlet to ensure fluid flows in only one direction.

·          A back pressure control valve located near the system outlet, used to set system pressure, adjustable from 175 to 1100 PSI (set at 1070PSI).

·          An RTD probe for temperature detection.

·          A gauge pressure transducer in a Nema 4 enclosure.

·         A stainless steel pressure gage located near the system outlet, displaying 0-1500 PSI.

This custom built circulating oil system measures 27 9/16” by 15”. The overall height is approximately 32 11/32”. The system can be secured using (4) mounting holes located on the base of the unit.

All Circulating Oil Systems are quoted specifically to customer requirements. Pricing can be determined only after the Circulating Oil System Request Form (found on this page) is completed. Contact the bearing manufacturer for information on the flow rate and fluid required.

Delivery is dependent upon supplier availability, lead times range from 4 to 10 weeks.