Explosion Proof Shutoff Solenoid Valves are for applications requiring rapid open and closed action. The 2-way solenoid valve is normally open; when a current is applied to the solenoid, the valve port is closed. When the current is off, the valve port opens.  The nominal power output is 7.3 watts.

The valve has a corrosion resistant stainless steel body. Buna-N seals are used.  The solenoid has a 1/2” NPT thread for connecting with conduit and is powered by 120V/60Hz (please consult factory for additional voltages and frequencies).

This valve features a 1/4” female NPT Inlet and 1/4” female NPT Outlet located at the top of the valve.  The orifice is 1/8” in diameter.  Maximum pressure is 35 PSI.  The lead wires are 18 Awg. 24” Lg and include a third wire ground.  The total length of the valve is 2 5/8” and total height is 4”.

This unit is suited to ambient temperatures of 0° to 104° F and media temperatures of 0° to 150° F.

This Explosion Proof Solenoid Shutoff Valve is UL listed and CSA certified for hazardous locations:

Class I:               Division 1, Groups C and D

Class II:  Division 1, Groups E, F, and G