Explosion Proof Shutoff Solenoid Valves are for applications requiring rapid open and closed action. The 2-way solenoid valve is normally closed; when a current is applied to the solenoid, the valve port opens and automatically closes again when the current shuts off.  The nominal power output is 7.3 watts.

 

The valve has a corrosion resistant stainless steel body. Buna-N seals are used.  The solenoid has a 1/2” NPT thread for connecting with conduit and is powered by 120V/60Hz (please consult factory for additional voltages and frequencies).

 

This valve features a 1/4” Female NPT Inlet and 1/4” Female NPT Outlet. The orifice is 1/4” in diameter.  Maximum pressure is 20 PSI.  The lead wires are 18 Awg. 24” Lg and include a third wire ground.  The total length of the valve is 2 5/8” and total height is 3 1/4”.

 

This unit is suited to ambient temperatures of 0° to 104° F and media temperatures of 0° to 150° F.

 

This Explosion Proof Solenoid Shutoff Valve is UL listed and CSA certified for hazardous locations:

 

Class I:               Division 1, Groups C and D

 

Class II:  Division 1, Groups E, F, and G

  Division 2, Groups A, B, C, D, E, F, and G.

Voltage

N/A 120V/60Hz

Valve Opens

N/A When Power is On

Orifice Size

N/A 1/4"

Max Pressure

N/A 20 PSI

Inlet

N/A 1/4" Female NPT

Outlet

N/A 1/4" Female NPT

Seals

N/A Buna-N