Oil-Rite Corporation > PurgeX® Oil and Grease Dispensing > PurgeX Complete Systems > "Quick Pack" Complete Lubrication Systems > "Quick Packs" for Oil Dispensing > Air Operated > Item # B3544-102  

Item # B3544-102, Quick Pack Complete Lubrication System, 2 Air Operated PurgeX Pumps for Liquid, 1 pt Polycarbonate Reservoir, 120V/60Hz

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites

PurgeX Quick Pack Lubrication Systems are reliable, economical, compact and easy to install.  This Quick Pack features 2 patented PurgeX pumps with a 3-way solenoid, easy to fill polycarbonate reservoir, and programmable cycle timer.  The complete centralized lubrication system is secured on a galvanized steel mounting plate that will fit into a standard 12” X 12” X 6” electrical enclosure.  The system requires only compressed air, electricity, and lubricant to begin operation.




PurgeX has the ability to deliver very small amounts of lubricant with each cycle and can be rapidly cycled for greater volumes; it is excellent for high speed applications.  Precise volumetric delivery is achieved with the positive displacement design.  Any entrapped air and other impurities are automatically purged from the system when the piston slightly over-travels the pump chamber with each cycle.  The net result is the ability to reliably deliver an exact amount of lubricant.  There is no “after drip,” which makes PurgeX a very effective lubrication solution where product contamination is a concern.


The 2 PurgeX pumps included in this system are operated with compressed air between 40 to 120 PSI.  The body is made of anodized aluminum alloy and the unit tolerates temperatures from -15° F to 180° F.  Buna-N seals are used (Viton seals are also available).  The liquid delivery per cycle is adjustable between 0 to .012 cubic inches.  Each PurgeX operates as an individual pump with a separate adjustment for lubricant delivery per cycle and 1/8” female NPT outlet.  The output can be easily and accurately adjusted by using the external knob located on each pump.  For additional information on the PurgeX pump used in this system, click here.


Quick Pack Features


This Quick Pack has a 1 pint clear polycarbonate reservoir mounted to the plate.  The reservoir is durable and allows liquid levels to be easily viewed.  A polypropylene screw cap on top of the reservoir can be removed for refilling. 


An adjustable, programmable cycle timer regulates lubrication intervals from .6 seconds to 24 hours.  The 3-way air solenoid is powered by 120V/60Hz (for additional voltages and frequencies, please consult factory).  The solenoid has a 1/8” female NPT air inlet; this is the only air connection required to operate the lubrication system. 


The galvanized steel mounting plate is 10 7/8” across, 10 3/4" in height, and extends 5 1/2” in depth.  The plate allows for surface mounting with (4) .194” diameter stand-offs that accommodate #10-32 screws.  There are also slots for mounting the system in a Nema enclosure.


The PurgeX "Quick Pack" Complete Lubrication System is easy to install.  Simply secure the mounting plate, connect compressed air, supply power to the solenoid, and route tubing from the outlets to the lubrication points. 


Additional requirements include tubing and fittings to reach lubrication points and an electrical enclosure, if desired.


Lubricant Type






Reservoir Capacity

1 pt

Volume Output Per Feed

0 to .012 cu. in.


.250" dia

Inlet Pressure

40-120 PSI

Air Inlet

1/8" Female NPT

Liquid Inlet

1/8" Female NPT


1/8" Female NPT



Mounting Plate

Galvanized Steel


Install B3544
(PDF, 667KB)

 This Item is Compliant 


Site Created by ThomasNet Web Solutions and Powered by Navigator Platform 
Oil-Rite Corporation