Multiple Feed Manual Lubricators are ideal for continuous operation. Liquid is dispensed when the lubricator is turned on with a toggle shutoff (using the toggle does not affect the metering adjustment).  Anywhere from 2 to 24 valves may be connected to one reservoir (please consult factory for valve combinations not shown).  The modular construction allows for additional valves to be added at a later date if needed (part no. B3151-01B11GW).

 

The reservoir and sight are vented to allow liquid to reach the brush by gravity.  An adjustable precision needle valve controls the flow rate; it has a friction lock to guard against loosening from vibration.  Drop feeding can be observed through the glass viewing window in the valve body.

 

This lubricator features a polycarbonate reservoir, polypropylene base, aluminum alloy valve body, plated steel shank, Buna-N seals and 5/8”-18 mounting thread.  It features a cap that swivels out of the way for easier filling, while remaining attached to the reservoir.  All valves feature a 1/4” OD tube outlet.  The diameter of the reservoir is 3 5/8".  Total height of the lubricator is 13 7/16", and total width of the valves is 7 11/16".

Reservoir Type

N/A Polycarbonate

Capacity

N/A 1 qt

Feeds

N/A 7

Outlet

N/A 1/4" OD Tube