Oil-Rite Corporation > Liquid Level Gages > Nylon Gages > Standard Nylon Gages > With 25" to 36" Centerline > Item # B3642-12600BA1W  

Item # B3642-12600BA1W, Standard Nylon Liquid Level Gage, 26" Centerline, Front Mount 1/2"-20

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites

Standard Nylon Liquid Level Gages can be used to view liquid levels in hydraulic reservoirs, tanks, large steel mill pumps, gearboxes, bearing housings, hydraulic equipment, crankcases, transformers and machinery oil reservoirs.  Their use can be extended to any industrial liquid level viewing applications. 


This gage has aluminum alloy end blocks.  The Trogamid nylon sight is clear and durable.  Liquid level and clarity can be viewed from all angles.  A 1/8” wide red line on the back of the sight enhances liquid level visibility.  Leak-proof construction is achieved with Buna-N seals.  The unit tolerates up to 125 PSI and 205° F. 


Fluid enters through the cross hole in the hollow lower bolt.  The gage is vented into the tank through the cross hole in the top bolt.   The length between the center of the two bolts is referred to as the centerline.  The distance between the center of the tank holes must be within 1/32” of the centerline measurement.  This gage is mounted from the front of the tank with (2) 1/2”-20 aluminum bolts.  The bolts should be torqued to 90 in-lbs.


For additional mounting options, seals and fractional inch centerline distances, reference the “Other Options” document located on this page. 








Max Pressure

125 PSI

Max Temperature

205° F



Sight Material



B3642-1 Other Options
(PDF, 198KB)

 This Item is Compliant 


Site Created by ThomasNet Web Solutions and Powered by Navigator Platform 
Oil-Rite Corporation