Broad Face Nylon Liquid Level Gages feature a large rectangular sight, allowing liquid level and clarity to be easily viewed from a distance. These liquid level gages can be used on hydraulic reservoirs, tanks, large steel mill pumps, gearboxes, bearing housings, hydraulic equipment, crankcases, transformers and machinery oil reservoirs.  Their use can be extended to many industrial liquid level viewing applications. 

 

This liquid level gage has a clear, durable nylon sight that is rectangular in shape.  The front viewing area is 1 3/4” wide.  A 1/8” wide red line on the back of the sight enhances liquid level visibility.  Easy-to-read “High” and “Low” level markings provide additional visual cues.  Two aluminum tie rods run through the center of the sight connecting the aluminum end blocks.  Leak-proof construction is achieved with Buna-N seals.  The unit tolerates up to 50 PSI and 205° F. 

 

Fluid enters through the cross hole in the hollow lower bolt.  The gage is vented into the tank through the cross hole in the top bolt.  The length between the center of the two bolts is referred to as the centerline.  The distance between the center of the tank holes must be within 1/32” of the centerline measurement.  This gage is mounted from the front of the tank with (2) 1/2”-20 aluminum bolts.  The bolts should be torqued to 90 in-lbs.

 

For additional mounting options, seals and fractional inch centerline distances, reference the “Other Options” document located on this page. 

Centerline

N/A 3"

Mounting

N/A 1/2"-20

Feature

N/A Standard

Max Pressure

N/A 50 PSI

Max Temperature

N/A 205° F

Seals

N/A Buna-N

Sight Material

N/A Broad Face Nylon