Oil-Rite Corporation > Liquid Level Gages > Aluminum Gages > Standard Aluminum Gages > With 3" to 12" Centerline > Item # B3540-10700BN3W  

Item # B3540-10700BN3W, Standard Aluminum Liquid Level Gage, 7” Centerline, 1/2" Male NPT Adapters


    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Standard Aluminum Liquid Level Gages can be used to view liquid levels in hydraulic reservoirs, gearboxes, bearing housings, crankcases, transformers and machinery oil reservoirs.  Their use can be extended to any industrial liquid level viewing application.  

 

This sturdy gage is made of corrosion and rust resistant milled aluminum.  The end pieces are permanently secured through a staking process.  The unit tolerates up to 175 PSI and 225° F.  The liquid viewing sight is glass.  Leak-proof construction is achieved with Buna-N seals. 

 

Fluid enters through the cross hole in the hollow lower bolt.  The gage is vented into the tank through the cross hole in the hollow top bolt.  The length between the center of the two bolts is referred to as the centerline.  The distance between the center of the tank holes must be within 1/32” of the centerline measurement. This gage is mounted from the front of the tank with (2) bolts with 1/2" Male NPT Adapters.

 

For additional mounting options, seals and fractional inch centerline distances, reference the “Other Options” document located on this page.






 Specifications   

Centerline

7"

Mounting

1/2" Male NPT Adapters

Feature

Standard

Max Pressure

175 PSI

Max Temperature

225° F

Seals

Buna-N

Body Material

Aluminum


 DOWNLOADS 

B3540-1 Other Options
(PDF, 144KB)



 This Item is Compliant 


ROHS/REACH
View
RoHS and REACH

Site Created by ThomasNet Web Solutions and Powered by Navigator Platform 
Oil-Rite Corporation