Drum Gages can be used to determine the level and condition of liquids stored in steel drums. Oils, solvents, chemicals, water, and many other fluids may be used with Drum Gages.  Drum Gages are suitable for indoor or outdoor use and provide instant visual checks with extreme accuracy.  This Drum Gage is sold without a faucet.  A faucet may be attached.

 

The 1/2” diameter glass sight on the liquid level gage is protected on three sides by rust-resistant plated steel.  A red line on a white background enhances liquid level visibility.  A protected vent hole in the aluminum cap reduces the possibility of dust, dirt, or moisture getting inside the gage.  The gage uses atmospheric pressure.  Leak-tight construction is achieved with Buna-N seals.  The iron tee has a ¾” female NPT for attaching a faucet.  There is a ¾” male NPT mounting thread that connects to the drum.  The unit tolerates temperatures up to 225° F.

 

The length from the center of the mounting hole to the top of the viewable portion of the glass sight is 18 3/8”.  The total height of the unit is 22 5/32”.

 

Dimensions:

 

A         Height from Center of Mounting Hole to Top of Viewable Glass         18 3/8"

B         Height from Center of Mounting Hole to Top of Gage                       21 13/32"

           Total Height                                                                                 22 5/32"

 

Height From Center of Mounting Hole to Top of Viewable Glass

N/A 18 3/8"

Total Height

N/A 22 13/32"

Seals

N/A Buna-N

Sight

N/A Glass

Mounting Thread

N/A 3/4" Male NPT

Feature

N/A With Tee