Full Flow Electro Dispensers are especially suitable for intermittent operation.  Lubrication occurs when the solenoid is activated.  This oiler features an acrylic reservoir with lightweight and durable polypropylene endplates.  It allows maximum fluid visibility by eliminating the center post common to many reservoirs.

 

The reservoir and sight are vented to allow liquid to flow easily by gravity through the 1/4” port.  An additional valve is needed for the regulation of liquid flow, such as a valve brush.

 

This reservoir design utilizes a permanent bond that eliminates gaskets.  The unit can be filled using the aluminum swing-away filler cap.  The solenoid has a 1/2" NPT thread for connecting with conduit and is powered by 120V/60Hz (additional voltages and frequencies are available).  Buna-N seals are used (Viton and EPDM seals are also available).   A Viton o-ring creates a seal between the reservoir and fitting. There is a 1/4” female NPT outlet on the aluminum valve body.  The 1/8” female NPT bottom outlet has a plated steel pipe plug installed and 5/8”-18 mounting thread. 

 

The diameter of the reservoir is 4 1/4” and the total height of the dispenser with pipe plug installed is 9 1/4”.

NOTE: This reservoir is not for use with isopropyl alcohol.  Polycarbonate reservoirs or reservoirs with aluminum endplates and Viton seals are recommended for use with isopropyl alcohol.

Reservoir Type

N/A Acrylic

Capacity

N/A 1 qt

Outlet

N/A 1/4" Female NPT, 1/8" Female NPT

Voltage

N/A 120V/60Hz

Style

N/A Clear View

Endplates

N/A Polypropylene