PurgeX has the ability to deliver very small amounts of lubricant with each cycle.  Precise volumetric delivery is achieved with the positive displacement design.  There is no “after drip,” which makes PurgeX a very effective lubrication solution where product contamination is a concern.

 

This PurgeX is ideal for applications where compressed air is not available or where direct interface to machine controls is desired.  It is operated by an electric motor powered by 120V/60Hz (other voltages and frequencies are available upon request).  Lubrication cycles can be easily synchronized with machine operation.  The body is made of anodized aluminum alloy and the unit tolerates temperatures from -15° F to 120° F.  Buna-N seals are used.  The liquid delivery per motor revolution is adjustable between 0 to .009 cubic inches and continuous as long as power is supplied to the motor.  The motor speed is 1 RPM (a 6 RPM model is also available).  The piston diameter is .250”.  There is a 1/8” female NPT liquid inlet.  Each feed has a 1/8” female NPT outlet.  This is a 4 feed unit that is 6 1/2” in length and 4 17/32” in height.  There are (2) 13/64” dia mounting holes.  The motor is  enclosed in an electrical box. 

 

Each PurgeX in the manifold operates as an individual pump with a separate adjustment for lubricant delivery per cycle.  The volume of output can easily be adjusted by using the external knobs.  Lubricant delivery can be completely shut off at any time by adjusting the piston to the fully closed position.  Do not use a pipe plug as this could cause damage to the internal mechanism.

 

The self-priming PurgeX will fill lines with lubricant automatically.  A vacuum pulls liquid into the PurgeX chamber with each cycle.  Any entrapped air and other impurities are automatically purged from the system when the piston slightly over-travels the pump chamber with each cycle.  The net result is the ability to reliably deliver an exact amount of lubricant. 

 

Additional requirements include a reservoir, electrical connection, and tubing and fittings.

Motor Speed

N/A 1 RPM

Motor Mount

N/A Electrical Box

Volume Output Per Feed

N/A 0 to .009 cu. in.

Feeds

N/A 4

Piston

N/A .250" dia

Seals

N/A Buna-N

Liquid Inlet

N/A 1/8" Female NPT

Outlet

N/A 1/8" Female NPT

Voltage

N/A 120V/60Hz

Volume Adjustment

N/A External Knobs

Lubricant Type

N/A Liquid/Oil