Oil-Rite manufactures Lubrication Systems specifically to customer requirements.  All systems are engineered, designed, manufactured and fully tested at Oil-Rite.  This is an example of a custom built Circulating Oil System. 

This Circulating Oil System has a pump providing 18 GPM at 35 PSI.  The 1 1/2 HP, 1735 RPM, TEFC motor is operated by 3 phase power at 230/460V 60Hz.

The 80 gallon capacity reservoir is constructed of welded steel.  The sturdy top plate is 3/8” thick.  A top filler cap makes filling the reservoir quick and simple.  The filler cap is equipped with an air filter and liquid strainer to help maintain liquid quality.  A baffle in the tank separates sediment and reduces turbulence.  There is a 60 mesh stainless steel suction filter inside the reservoir to filter larger debris.  There is also a stainless steel 150 micron filter located near the system outlet. 

This Circulating Oil System features a water cooled heat exchanger to help regulate liquid temperature.  A stainless steel dial thermometer displays 0 to 250°F.

Additional controls include:

·          A check valve located at the system outlet to ensure fluid flows in only one direction. 

·          A cast iron bypass relief valve used to set system output pressure, adjustable from 7 to 35 PSI.

·          Two pressure gages each displaying 0-60 PSI.

·          A pressure switch adjustable from .5 to 80 PSI

·          A flow switch set at 18 GPM.

·          A 10” liquid level gage on the outside of the reservoir with a dial thermometer allowing visual check of liquid level, condition, and temperature at a glance.